LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Compass Trailhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 155 (Power Transfer Unit (Service Information)) >> Switch, Transfer Case >> Removal And Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal And Installation: Installation

WARNING: This page is about a different car, the 2019 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the Power Transfer Unit (PTU) switch for damage.
  2. Install the PTU switch into the media hub, verifying the retaining clips are properly seated.
  3. Connect the PTU switch wire harness connector.
  4. Install the media hub. Refer to INSTALLATION
  5. Install the floor console. Refer to INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals