Sensor, Fuel Pressure: Removal
WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
High pressure fuel spray can cause severe cuts, and is extremely flammable. Before opening any part of the high pressure fuel system, wait for a minimum of 30 seconds after turning off the engine to allow pressure to bleed down from the high pressure side of the fuel system. Otherwise severe personal injury can result when the high pressure fuel system is opened.
WARNING:
No sparks, open flames or smoking. Risk of poisoning from inhaling and swallowing fuel. Risk of injury to eyes and skin from contact with fuel. Pour fuels only into suitable and appropriately marked containers. Wear protective clothing.
- Disconnect and isolate the negative battery cable.
- Remove the engine cover. Refer to COVER, ENGINE, REMOVAL
.
- Disconnect the fuel pressure sensor wire harness connector (1).
- Remove the fuel pressure sensor (1).