LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2018 >> Wrangler JK Unlimited Rubicon, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Diesel >> Sensor, Intake Air Pressure >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Sensor, Intake Air Pressure: Removal

GC0131128Courtesy of CHRYSLER GROUP, LLC

The Intake Air Pressure Sensor (5) is located on the air cleaner cover (1).

  1. Disconnect the negative battery cable.
  2. Disconnect the Intake Air Pressure (IAP) sensor wire harness connector (4).
  3. Remove fasteners and the IAP sensor.
scientia non olet · About LEMON Manuals