Diagnostic Test
- DETERMINE ACTIVE OR STORED DTC
- Make sure the battery is fully charged.
- Turn the ignition on.
- Wait 12 seconds, then with the scan tool, read all active OCM DTCs.
Is the DIAGNOSTIC TROUBLE CODE (DTC) active or stored?
OCM - ACTIVE DTC
- Go To 2
OCM - STORED DTC
- Perform the RESTRAINTS SYSTEM INTERMITTENT TEST. Refer to OCCUPANT-CLASSIFICATION MODULE INTERMITTENT TEST .
- PERFORM PROXI ALIGNMENT PROCEDURE
- Using the scan tool, insure BCM is programmed correctly and perform PROXI alignment procedure.
Is the DTC still active?
Yes
- Replace the Occupant Classification Module (OCM) in accordance with Service Information. Refer to MODULE, OCCUPANT CLASSIFICATION (OCM), REMOVAL AND INSTALLATION .
- Perform the OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST. Refer to OCCUPANT CLASSIFICATION MODULE (OCM) VERIFICATION TEST .
No
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
- Using the scan tool, insure BCM is programmed correctly and perform PROXI alignment procedure.