Module, Electronic Limited Slip Differential (ELSD): Removal
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Remove left rear seat. Refer to SEAT, FRONT, REMOVAL .
- Disconnect and isolate the negative battery cable, for battery location and disconnect procedure. Refer to CABLES, BATTERY, REMOVAL .
- Pull carpet back to expose ELSD module (1).
- Disconnect the body wire harness connectors (3) from the module connector receptacle.
- Remove module mounting nuts (2).
- Remove the module from the vehicle.