Module, Drivetrain Control (DTCM): Removal
WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Position the left front seat to its full forward position.
- Disconnect and isolate the negative battery cable, for battery location and disconnect procedure. Refer to CABLES, BATTERY, REMOVAL .
- Remove the cover panel from the electronic module tub (4) to access the Drive Train Control Module (DTCM) (3).
- Disconnect the body wire harness connector from the module connector receptacle.
- Release integral latches that secures the module to the mounting bracket and slide the module upward.
- Remove the module from the vehicle.