LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Electronic Control Modules (Service Information)) >> Module, HVAC >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, HVAC: Installation

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0158367Courtesy of CHRYSLER GROUP, LLC
  1. Position the Heating, Ventilation, and Air Conditioning (HVAC) module (3) to the Instrument Panel.
  2. Install the three retaining screws (1) that secure the HVAC module to the HVAC housing.
  3. Tighten all the screws that secure the HVAC module to the HVAC housing to 2 N.m (17 in. lbs.).
  4. Connect the wire harness connectors (2) to the HVAC module.
  5. Install the radio. Refer to RADIO, INSTALLATION .
  6. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
  7. Initiate the Actuator Calibration function using a scan tool. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals