LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Electronic Control Modules (Service Information)) >> Module, Power Sunroof (PSM) >> Module Programming >> Sunroof Initialization And Obstacle Detection Calibration >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sunroof Initialization And Obstacle Detection Calibration: Notes

WARNING: This page is about a different car, the 2018 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Sunroof initialization & obstacle detection calibration is a process to teach the sunroof/sunshade motor(s) where to stop for the correct open, close & vent positions and calibrate the obstacle detection system.

NOTE:

For the following procedures verify that the battery is in good condition and do not perform procedures while vehicle battery is connected to battery charger.

scientia non olet · About LEMON Manuals