LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2019 >> Renegade Trailhawk >> Repair and Diagnosis >> Transmission >> Transfer Case >> Power Transfer Unit (Service Information) >> Standard Procedure >> Power Transfer Unit (PTU) Fluid Fill
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Power Transfer Unit (PTU) Fluid Fill

The PTU oil is not a scheduled maintenance service.

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  2. Remove the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION
  3. Remove the right front tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
    GC0164728Courtesy of CHRYSLER GROUP, LLC
  4. Remove the PTU oil filler cap and check the oil level is just below the bottom edge of the fill hole.
  5. If necessary fill the PTU to the bottom of the fill plug hole using the specified fluid. Refer to CAPACITIES AND RECOMMENDED FLUIDS, SPECIFICATIONS .
  6. Clean and tighten the PTU fill plug.
  7. Install the right front tire and wheel assembly. Refer to REMOVAL AND INSTALLATION .
  8. Install the belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION
scientia non olet · About LEMON Manuals