5.7L / 6.4L
- Apply MOPAR® thread sealant with PFTE to the sensor threads.
- Install the coolant temperature sensor (2) into the water pump housing.
- Tighten the coolant temperature sensor to 11 N.m (8 ft. lbs.).
- Connect the coolant temperature sensor wire harness connector (3).
- Install the air intake system. Refer to BODY, AIR CLEANER, INSTALLATION, 5.7L or BODY, AIR CLEANER, INSTALLATION, 6.4L .
- Fill the cooling system. Refer to STANDARD PROCEDURE .