LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee Altitude, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Hands Free Liftgate >> Removal >> Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Hands Free Liftgate: Removal: Module

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0200032Courtesy of CHRYSLER GROUP, LLC
  2. Remove the push pins (1) and the fasteners (2) from rear bumper lower fascia to gain access to the HFE liftgate module.
    GC0186771Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connectors (1) from the Hands Free Entry (HFE) liftgate module (3).
  4. Remove the fastener (2) securing the HFE liftgate module (3) to the HFE sensor bracket.
  5. Remove the HFE liftgate module from the vehicle.
scientia non olet · About LEMON Manuals