LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee Altitude, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Power Liftgate Control (PLGM) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module, Power Liftgate Control (PLGM): Removal

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the left rear quarter trim panel. Refer to PANEL, QUARTER TRIM, REMOVAL .
    GC0187049Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the wire harness connectors (1) from the Power Liftgate Module (PLGM) connector receptacles.
  4. Press the latch feature (2) of the PLGM housing and pull the PLGM (3) out and away from the body panel.
  5. Remove the PLGM (3) from the vehicle.
scientia non olet · About LEMON Manuals