3.2 L
- Position vehicle on a suitable hoist with the transmission in neutral. Refer to HOISTING, STANDARD PROCEDURE .
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Raise the vehicle enough to gain access to the left front wheel.
- Remove the left front wheel. Refer to REMOVAL .
- Through the opening rearward of the suspension strut, remove the lower bolts holding the Transmission Control Module (TCM) to the transmission located below the power brake booster.
- Lower the vehicle.
- Remove the engine cover.
- Disengage the lock (1) holding the wire connector to the TCM.
- Separate the wire connector from the TCM.
- Remove the bolts holding the top of the TCM to the transmission.
- Separate the TCM from the vehicle.