Torque Specifications: Notes
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Damper to Power Transfer Unit (PTU) | 24 | 18 | - | |
| Heat Shield to PTU M8 | 23 | 17 | - | |
| Heat Shield to PTU M6 | 11 | 8 | - | |
| Intake Manifold Support to PTU Bracket | 12 | 9 | - | |
| Mounting Bracket to PTU | 22 | 16 | - | |
| PTU Mounting Bracket to Engine Block Bolts | 44 | 32 | - | |
| PTU Fill Plug | 40 | 30 | - | |
| PTU to Transmission Flange | 48 | 35 | - | |
| PTU Actuator Short Bolt | 4 + 45° | - | 35 + 45° | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| PTU Actuator Long Bolt | 4 + 75° | - | 35 + 75° | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. |
| On used fasteners that have a thread locker patch use Mopar ® Lock & Seal Adhesive. | ||||