Diagnostic Test
- VERIFY THE DTC IS ACTIVE
- Turn the ignition on.
- With the scan tool, record and erase DTCs.
- Cycle the ignition from off to on.
- With the scan tool, read DTCs.
Is the DTC active at this time?
Yes
- Go To 2
No
- Perform the ABS-INTERMITTENT CONDITION TEST. Refer to ABS INTERMITTENT CONDITION .
- CHECK FOR BODY CONTROL MODULE (BCM) DTCS
- With the scan tool, read BCM DTCs.
Are there any BCM CAN Bus DTCs present?
Yes
- Perform the appropriate diagnostic procedure. Refer to DIAGNOSTIC CODE INDEX .
No
- Go To 3
- With the scan tool, read BCM DTCs.
- CHECK FOR ELECTRIC PARKING BRAKE (EPB) MODULE
- With the scan tool, read EPB DTCs.
Are there any EPB DTCs present?
Yes
- Perform the appropriate diagnostic procedure. Refer to DIAGNOSTIC CODE INDEX .
No
- Go To 4
- With the scan tool, read EPB DTCs.
- CHECK OTHER MODULES FOR DTCS
- With the scan tool, read DTCs.
Are there any other modules reporting implausible communication DTCs against the EPB?
Yes
- Using the schematics as a guide, check the EPB Module pins, terminals, and connectors for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace the Electric Parking Brake (EPB) Module in accordance with the Service Information. Refer to MODULE, ELECTRIC PARK BRAKE (EPBM), REMOVAL .
- Perform the ABS VERIFICATION TEST. Refer to ABS VERIFICATION TEST .
No
- Using the schematics as a guide, check the ABS Module pins, terminals, and connectors for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace the Anti-Lock Brake System (ABS) Module in accordance with the Service Information. Refer to MODULE, ANTI-LOCK BRAKE SYSTEM (ABS), REMOVAL .
- Perform the ABS VERIFICATION TEST. Refer to ABS VERIFICATION TEST .
- With the scan tool, read DTCs.