LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Cherokee Trailhawk >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (2.0L Ignition System (Service Information)) >> Sensor, Knock >> Removal >> Rear Knock Sensor
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Knock Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the intake manifold. Refer to REMOVAL .
    GC0183347Courtesy of CHRYSLER GROUP, LLC
  3. Unlock and disconnect the knock sensor wire harness connector (1).
    GC0182126Courtesy of CHRYSLER GROUP, LLC
  4. Remove the mounting bolt (2) and knock sensor (1).
scientia non olet · About LEMON Manuals