Diagnostic Test
- CHECK FOR AN ACTIVE DTC
- With the scan tool, read DTCs and record on the repair order.
- Record the Environmental Data.
- With the scan tool, erase DTCs.
- Using the recorded Environmental Data, along with the When Monitored and Set Conditions above, operate the vehicle in the conditions that set the DTC.
- With the scan tool, read Drivetrain Control Module (DTCM) DTCs.
Did the DTC return?
Yes
- Go To 2
No
- Perform the TESTING FOR AN INTERMITTENT CONDITION procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .
- CHECK THE ANTI-LOCK BRAKE SYSTEM (ABS) MODULE FOR DTCS
- With the scan tool, check for ABS DTCs.
Were any ABS DTCs found?
Yes
- Diagnose the ABS DTCs in accordance with the diagnostic information.
- Perform the DTCM VERIFICATION TEST. Refer to DTCM VERIFICATION TEST .
No
- Perform the DTCM VERIFICATION TEST. Refer to DTCM VERIFICATION TEST .
- Test complete.
- With the scan tool, check for ABS DTCs.