LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2021 >> Renegade Trailhawk >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Electronic Control Modules (Service Information) >> Module, Radio Receiver >> Description And Operation >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Description And Operation: Description

There are three Radio Receiver Modules (RRM) available in this vehicle, Uconnect® 3 with 5 inch display, Uconnect® 4 with 7 inch display and Uconnect® 4C NAV with 8.4 inch display. Each RRM has a distinct chassis design and is identified by a sales code.

The Uconnect® 3 RRM includes the following features:

The Uconnect® 4 RRM includes the following features:

The Uconnect® 4C NAV RRM includes the following features:

Uconnect® 4 naming convention is as follows:

4 4th Generation Capable of Apple CarPlay and Google Android Auto
C Connected Built-in connected devices (embedded modem)
NAV Navigation Built-in Uconnect Navigation (not mirrored from a smartphone)

Hardwired circuitry connects the RRM to the electrical system of the vehicle. These hardwired circuits are integral to several wire harnesses, which routes throughout the vehicle and retained by many different methods. These circuits may be connected to each other and to the vehicle electrical system through the use of a combination of soldered splices, splice block connectors, and many different types of wire harness terminal connectors and insulators. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds. For proper wire repair, and connector repair procedures. Refer to STANDARD PROCEDURE and REMOVAL or INSTALLATION .

The RRM cannot be adjusted or repaired. If the RRM is damaged or ineffective, it must be replaced.