Body Control Module (BCM)
BODY CONTROL MODULE (BCM)
| Refer to COMPONENT INDEX . |
- Acquisition on the CAN-C bus of the LaneSense system enabled/disabled status from the FFCM to control the ICS LED indication.
- Acquisition on the CAN-C bus of the chime request from the FFCM to inform the driver to place their hands on the steering wheel.
- Acquisition on the CAN-C bus of the current LaneSense system sensitivity setting from the FFCM.
- Acquisition on the CAN-C bus of the current LaneSense system torque intensity setting from the FFCM.
- Acquisition on the Local Interface Network (LIN) bus of the LaneSense system enable/disable switch (pressed/not pressed) status from the ICS.
- Gates the ICS ON/OFF signal command on LIN to a signal on CAN-C.
- Gates the current ICS status signal on CAN-C to the BCM concerning an ICS control signal on the LIN bus.
- Transmission on the CAN bus of the chime request to the Radio to inform the driver to place their hands on the steering wheel (audible alert).
- Transmission on the CAN bus of the LaneSense system current sensitivity setting to the Radio.
- Transmission on the CAN bus of the LaneSense system current torque intensity setting to the Radio.
- Transmission on the CAN-C bus of the (left/right) turn signal lamp status to the FFCM.
- Transmission on the CAN-C bus of the wiper status (parked/not parked) to the FFCM.
- Transmission on the CAN-C bus of the reverse gear status to the FFCM.
- Transmission on the CAN-C bus of the vehicle configuration settings to the FFCM.
- Transmission on the CAN-C bus of the net configuration module options to the FFCM.
- Transmission on the CAN-C bus of the ignition status to the FFCM.
- Transmission on the CAN-C bus of the LaneSense system enable/disable request to the FFCM (gated from LIN).
- Transmission on the CAN-C bus of the LaneSense system sensitivity setting request (gated from CAN) to the FFCM.
- Transmission on the CAN-C bus of the LaneSense system torque intensity setting request (gated from CAN) to the FFCM.
- Transmission on the LIN bus of the LaneSense system enable/disable switch indicator control status to the ICS (gated from CAN-C).