Torque Specifications
WARNING: This page is about a different car, the 2021 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATION
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Hub Nut, All Engines | Refer to the Half Shaft Installation procedure. Refer to REMOVAL AND INSTALLATION . | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened to specifications. | ||
| Bearing Plate to Intermediate Bracket Bolts (All Engines) | 10 | - | 89 | |
| Intermediate Shaft Bracket to Engine Block Bolts (1.4L Turbo MultiAir) | 25 | 19 | - | |
| Intermediate Bracket to Engine Block Bolts (2, 4L TS and 1.6 Turbo Diesel) | 50 | 37 | - | |