Fan, Cooling: Removal: 2.4L
- Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
- Remove the pressurized coolant bottle. Refer to BOTTLE, PRESSURIZED COOLANT, REMOVAL .
- Remove the bolt (2), the two screws (3) and remove the resonator (1).
- Remove the two push-pins (2) and the air intake tube (1).
- Remove the hood latch and cables. Refer to LATCH, HOOD, REMOVAL
.
- Disconnect the cooling fan module wire harness connector (2) and remove the wire harness (1) from upper radiator panel (3).
- Remove the screws (1) and the upper radiator panel (2).
- Remove the six bolts (1, 2) and the upper core support (3).
- Remove the upper radiator hose (1).
- Remove the bolts (1) and the cooling fan (2).