Torque Specifications - 2.0L
TORQUE SPECIFICATIONS (2.0L)
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | COMMENT |
|---|---|---|---|---|
| Catalytic Converter to Turbocharger Bolts | 27 | 20 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened in sequence. Refer to CONVERTER, CATALYTIC, INSTALLATION . |
| Catalytic Converter to Turbocharger Nuts | 27 | 20 | - | |
| Catalytic Converter to Mounting Bracket Bolts | 35 | 25 | - | |
| Catalytic Converter Mounting Bracket to Engine Block Bolts | 35 | 25 | - | |
| Catalytic Converter Heat Shield Bolts | 9 | - | 80 | |
| Catalytic Converter to Crossunder Pipe Nuts | 32 | 24 | - | |
| Exhaust Pipe Clamp Nut | 45 | 33 | - | |
| Exhaust Pipe Clamp Bolt | 25 | 18 | - | |
| Exhaust Crossunder Pipe Isolator Bolt | 28 | 21 | - | |
| Gas Particulate Filter to Turbocharger Bolts | 27 | 20 | - | Do not reuse these fasteners. If removed, a NEW fastener must be installed and tightened in sequence. Refer to FILTER, GAS PARTICULATE, INSTALLATION . |
| Gas Particulate Filter to Turbocharger Nuts | 27 | 20 | - | |
| Gas Particulate Filter to Mounting Bracket Bolts | 35 | 25 | - | |
| Gas Particulate Filter Mounting Bracket to Engine Block Bolts | 35 | 25 | - | |
| Muffler Clamp Nut | 55 | 41 | - | |
| Muffler Isolator Nuts | 28 | 21 | - |