Radio With Display Screen Module (DSM)
RADIO WITH DISPLAY SCREEN MODULE (DSM)
| Refer to COMPONENT INDEX . |
The radio receives multiple input signals in order to process and send a live video feed to the Display Screen Module (DSM).
Inputs
- Acquisition on the CAN-IHS bus of the reverse gear status signal.
- Acquisition on the CAN-IHS bus of the transmission type signal.
- Acquisition on the CAN-IHS bus of the vehicle speed signal.
- Acquisition on the CAN-IHS bus of the PRND status signal.
- Acquisition on the CAN-IHS bus of the 'image defeat' request signal.
- Acquisition of the LVDS video signal from the CVPM
- Acquisition of the radio DSM touch screen coordinates pressed by the driver to enable the Surround View camera system and display the camera system image via the touch screen control
- Acquisition of the radio DSM touch screen coordinates pressed by the driver to enable the Rear View camera system and display the camera system image via the touch screen control
- Acquisition of the image defeat signal to disable display of the surround view camera image. NOTE: Image cannot be disabled when the transmission is in "REVERSE" gear.
- Acquisition of the radio DSM touch screen coordinates pressed by the driver to select the surround view camera menu screen personalization entry, DYNAMIC GRIDLINES ON/OFF (i.e. enable/disable) for active dynamic grid lines.
- Acquisition of the radio DSM touch screen coordinates pressed by the driver to select surround view camera menu screen personalization entry, CAMERA DELAY ON/OFF (i.e. enable/disable) for active camera delay.
- Acquisition on the CAN-IHS bus of the display view status signal
Outputs
- Transmission on the CAN-IHS bus of the radio DSM touch screen coordinates pressed by the driver to the CVPM.
- Transmission on the CAN-IHS bus of the surround view camera display status signal to the CVPM.
- Transmission on the CAN-IHS bus of the controls menu soft button status signal.