Description And Operation
DESCRIPTION
| 1. | Radio Receiver Module (RRM) |
| 2. | Display Screen Module (DSM) |
There are three radios available in this vehicle:
- Uconnect® 5 with 213 mm (8.4 in.) with integral display
- Uconnect® 5 with 257 mm (10.1 in.) with Display Screen Module (DSM)
- Uconnect® 5 NAV with 257 mm (10.1 in.) with Display Screen Module (DSM)
Each radio has a distinct chassis design and is identified by a sales code. Only models equipped with the Uconnect® 5 NAV 257 mm (10.1 in.) radio are natively programmed with Navigation.
The following are the Sales Codes of available radios for this vehicle:
| Display Size | Sales Code |
| Uconnect® 5 with 213 mm (8.4 in.) | UBE, UEE, UFE, UPE, URE, UUE |
| Uconnect® 5 with 257 mm (10.1 in.) | UBU, UEU, UFU, UPU, UUU |
| Uconnect® 5 NAV with 257 mm (10.1 in.) | UBN, UEN, UFN, UPN, URN, UUN |
Hardwired circuitry connects the Radio Receiver Module (RRM) (1) to the electrical system of the vehicle. These hardwired circuits are integral to several wire harnesses, which routes throughout the vehicle and retained by many different methods. These circuits may be connected to each other and to the vehicle electrical system through the use of a combination of soldered splices, splice block connectors, and many different types of wire harness terminal connectors and insulators. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds. For proper wire repair, refer to WIRE SPLICING . For connector repair procedures, refer to CONNECTOR TERMINAL REMOVAL and refer to CONNECTOR TERMINAL INSTALLATION .
The RRM cannot be adjusted or repaired. If the RRM is damaged or ineffective, it must be replaced.
OPERATION
Refer to the Audio/Video/Entertainment/Connectivity Description and Operation for additional information. Refer to DESCRIPTION AND OPERATION .