Rear Drive Module Output Seal: Notes

REMOVAL

NOTE:

Left side shown, right side similar.

Remove the rear halfshaft. Refer to REAR HALFSHAFT .
Remove the dust cover.

Courtesy of CHRYSLER GROUP, LLC

1 - Dust Cover
Carefully remove the oil seal.

Courtesy of CHRYSLER GROUP, LLC

1 - Output Seal

INSTALLATION

NOTE:

Use care when installing half shaft to axle assembly. The half shaft installation angle should be minimized to avoid damage to the seal upon installation.

Install a NEW oil seal.
Install a NEW dust cover.
Install the rear halfshaft. Refer to REAR HALFSHAFT .