Set Condition

• C053D  - The PCM determines that the Master Cylinder Pressure Sensor signal is irrational.
• C10F5  - The PCM determines that the Brake Torque signal is irrational.
• P057B  - The PCM determines that the Brake Pedal Position Sensor signal is irrational.
• U0121  - The PCM does not receive the Brake Pedal Position Sensor signal.
• U0129  - The PCM does not receive the Master Cylinder Pressure Sensor signal.
• U0418  - The PCM receives an SNA message indicating that the has detected a fault in the Master Cylinder Pressure Sensor signal.
• U11BF  - The PCM receives an SNA message indicating that the has detected a fault in the Brake Pedal Position Sensor signal.
• (C0501, C0507, C050D, C0513) Wheel Speed Signal Rationality Faults  - When at a stop, one WSS signal is showing vehicles speed output and the other three WSS signals are reading 0 OR When the difference between one WSS signal compared to the other three WSS signals is more than 11 MPH, for 30 seconds.
• (U1409, U140A, U140B, U140C, U1412, U1417, U1418) Implausible Wheel Speed and Distance Signal Faults  - These faults will typically set when the ABS Module detects a fault with one of the WSS signals. The ABS Module will send an SNA or error flag against the sensor.

The (P057B, P057C, P057D, U11BF) BPP Sensor faults can set for any of the following: