October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Removal And Installation: Installation
- Position the intermediate shaft (2) to the vehicle.
- Slide the intermediate shaft coupler over steering gear input shaft.
 Courtesy of CHRYSLER GROUP, LLC
|
- Slide the intermediate shaft coupler over steering column output shaft.
- Install a NEW
intermediate shaft coupler pinch bolt (3) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS
.
- Place the steering wheel in a position which allows access to the intermediate shaft coupler pinch bolt (1).
- Install a NEW
intermediate shaft coupler pinch bolt (1) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS
.
- Position the steering column (3) to the instrument panel.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the two front steering column support bolts (2) and tighten them to the proper specification. Refer to TORQUE SPECIFICATIONS
.
- Install the two rear steering column support nuts (1) and tighten them to the proper specification. Refer to TORQUE SPECIFICATIONS
.
- Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION
.