Body Control Module
BODY CONTROL MODULE
| Refer to: COMPONENT INDEX . |
The BCM provides gateway functionality for certain heated steering wheel input signals between the SCCM and the CSWM. The BCM is also the vehicle configuration master.
Inputs
- Internal input commanded ignition state
- Heated steering wheel temperature sensor status from the steering wheel switch over the LIN bus
- Heated steering wheel temperature from the steering wheel switch over the LIN bus
Outputs
- Vehicle configuration data to the CSWM
- Vehicle configuration data to the Radio
- Gated ESS information to the CSWM
- Heated seat type with heated steering configuration to the CSWM
- Ignition state to the CSWM, ICS and Radio
- Remote Start active to the CSWM
- Average ambient temperature to the CSWM
- Engine run state gated to the CSWM
- Load shed strategy to the BCM
- ICS present configuration to the CSWM
- Steering wheel temperature sensor state and steering wheel temperature signal to the CSWM