Throttle Position (TP) Sensor

NOTE: For information on connector terminal identification and test conditions specified in the following tables, see ADJUSTMENTS article.

TP SENSOR CONTINUITY SPECIFICATIONS (1.6L)

Test Condition ⁽¹⁾

Check Between Pin Nos.

Continuity?

.006" (.15 mm)

1 & 2

Yes

.020" (.5 mm)

1 & 2

⁽¹⁾	Insert feeler gauge of specified thickness between throttle lever and throttle stop screw.

TP SENSOR VOLTAGE SPECIFICATIONS (1.8L)

Condition ⁽¹⁾

⁽²⁾ Volts

Throttle Closed

.58-.61

Wide Open Throttle

Approx. 3.65

⁽¹⁾	Also ensure voltage change is smooth between closed and open throttle.

⁽²⁾	Measure voltage between TP Sensor terminal No. 3 and ground with ignition ON and TP Sensor connected.