LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2004 >> Amanti >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Fuel System & Engine Control System >> MFI Control System >> Manifold Absolute Pressure (Map) Sensor >> Sensor Inspection >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor Inspection: Notes

  1. Connect the voltmeter between 1 and 4 of MAP sensor connector.

    Terminal 4: MAP sensor ground

    Terminal 1: MAP sensor output

  2. Measure the voltage between terminals.
    Fig 1: Illustrating MAP Sensor Test Specifications
    G00325072Courtesy of KIA MOTORS AMERICA, INC.
  3. If the voltage deviates from the standard value, replace the MAP sensor assembly.
scientia non olet · About LEMON Manuals