Error Detection
- If the sensor fluctuations of slide and front/rear height for one second after motor start-up are less than 6 pulses and 4 pulses respectively, and if the sensor fluctuation of reclining for 3.5 seconds is less than 50 mV, it is determined that the harness is short or sensor is fail.
- Countermeasure when error is detected.
Stop the operation if it is in auto replay. Though, it should be operable manually. When the failure is completely repaired, it can be automatically adjusted from the stop of auto replay. If the position sensor senses the pulse from the position sensor by the manual operation (in case of reclining, sensor fluctuation for 3.5 seconds is greater than 50 mV), we judge it is complete. This is called stop release of automatic operation.