Long Driving Test Mode

WARNING: This page is about a different variant/trim than selected.

Connect Hi-Scan (Pro) to the Data Link Connector (DLC).
Select the DTC function of Hi-Scan (Pro).
Start the engine and let the engine at idle for 35 seconds or more (^* A).
Drive the vehicle at 60 mph (55 ~ 65 mph) for 10 minutes or more and decrease the vehicle speed until it stops (^* B).
Let the engine at idle for 60 seconds or more (^* C).

Fig 1: Long Driving Test Mode Graph

Courtesy of KIA MOTORS AMERICA, INC.

Fig 2: Long Driving Test Mode Chart

Courtesy of KIA MOTORS AMERICA, INC.