October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Auto Light Sensor
- Remove the auto light sensor (A) after removing the defroster center cover from upper the crash pad.
Courtesy of KIA MOTORS AMERICA, INC.
- After ignition switch ON, measure the voltage between terminal No. 2 of the auto light sensor harness side connector (B) and body ground.
- OK:
Sensor power (+5V).
- Check for continuity between terminal No. 1 of the auto light sensor harness side connector (B) and body ground.
- If the circuit is not as specified, inspect the circuits connected to other parts.