DTC P2110//P2112 Throttle Actuator Control Module Performance // Throttle Actuator Control System-Stuck Closed (IG On): DTC Detecting Condition

DTC DETECTING CONDITION

Item	Detecting Condition	Possible Cause
DTC Strategy	Valve Close Stuck #2	Poor connector Faulty Throttle valve Fualty ETS motor Faulty PCM
Enable Conditions	Ignition Switch: On
Threshold Value	Vtps1 - ( TPS output as throttle valve is closed ) < 0.06V Chage of TPS output (per 10msec) < 0.025V
Diagnostic Time	Continuous
MIL on condition	1 driving cycle

NOTE: Vtps 1: TPS 1's output voltage, Vtps 2: TPS 2's output voltage