Malfunction Indicator Lamp Description

The On-board diagnostic lamp turns on to notify the driver for a problem on the vehicle.

However MIL will go off automatically after 3 sequential driving cycles, the same malfunction not redetected.

Immediately after the ignition switch is turned on, the malfunction indicator lamp keeps on for 5 seconds to indicate that the malfunction indicator lamp operates normally.

The items as below will be indicated by MIL.

1. Air flow sensor (AFS)
2. Engine coolant temperature sensor (ECTS)
3. Throttle position sensor (TPS)
4. Injector
5. Oxygen sensor (O2 sensor)
6. Crankshaft position sensor (CKPS)