Brake Line: Installation

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Install the brake hose (A) connecting bolt (B) and washer (C).

Fig 1: Identifying Brake Hose, Connecting Bolt And Washer
Courtesy of KIA MOTORS AMERICA, INC.
Tighten the brake tube (A) nut holding the brake hose (B) nut with a wrench.

Fig 2: Identifying Brake Tube And Brake Hose Nut
Courtesy of KIA MOTORS AMERICA, INC.
Install the brake hose clip (A).

Fig 3: Identifying Brake Hose Clip
Courtesy of KIA MOTORS AMERICA, INC.
After installation, breed the air in the brake system.

CAUTION: Be careful not to damage the brake hose by sharp edges or tools.