LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Rondo Base >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (1 Of 2) - 2.4L >> DTC P0197 Engine Oil Temp. Sensor Low Input >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. Ignition "OFF"
  2. Disconnect OTS connector.
  3. Measure resistance between terminals 1 and 2 of OTS connector. (Component side)

    SPECIFICATION 

    OTS RESISTANCE SPECIFICATION

    Temp. (°C) Temp. (°F) OTS Resistance (Ω)
    -20 -4 Approx. 16.5
    0 32 Approx. 6
    20 68 Approx. 2.5
    40 104 Approx. 1.1
    60 140 Approx. 0.5
    80 176 Approx. 0.3
    Fig 1: Measuring Resistance Between Terminals 1 And 2 Of OTS Connector
    G05182091
  4. Is resistance within the specification?

    YES 

    • Check for poor connection between ECM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO 

    • Check OTS for contamination, deterioration, or damage. Substitute with a known-good OTS and check for proper operation. If the problem is corrected, replace OTS and then go to "VERIFICATION OF VEHICLE REPAIR " procedure
scientia non olet · About LEMON Manuals