Component Inspection
- Ignition "OFF"
- Disconnect injector connector
- Measure resistance between terminals 1 and 2 of the injector connector (Component side)
SPECIFICATION :
RESISTANCE SPECIFICATIONTemp. (C) Temp. (°F) Resistance (Ω) 20 68 13.8 ~ 15.2 - Is resistance within the specification?
YES
- Go to POWER CIRCUIT INSPECTION
NO
- Check injector for contamination, deterioration, or damage. Substitute with a known-good injector and check for proper operation. If the problem is corrected, replace injector and then go to "VERIFICATION OF VEHICLE REPAIR " procedure