Transaxle Range (Tr) Switch: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the battery terminal.
Remove the battery and battery tray.
Remove the air cleaner assembly (Refer to AUTOMATIC TRANSAXLE ).
Disconnect the inhibitor switch connector (A).

Fig 1: Locating Inhibitor Switch Connector
Courtesy of KIA MOTORS AMERICA, INC.
Remove the control cable (A) from the manual control lever.

Fig 2: Locating Control Cable
Courtesy of KIA MOTORS AMERICA, INC.
Remove the inhibitor switch (A) and manual control lever (B).

Fig 3: Removing Inhibitor Switch And Manual Control Lever
Courtesy of KIA MOTORS AMERICA, INC.