LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Sedona Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> BCM (Body Control Module) >> Body Network System >> DTC Codes >> DTC B1602 Can Bus Physical Error, Bus Failure >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. Check Related component
    1. Connect scantool to Data Link Connector (DLC).
    2. Ignition "ON" & engine "OFF".
    3. Select "Diagnostic Trouble Codes (DTC s)" mode and monitor "DTC Status" parameter.
    4. Check if the DTC is erased while disconnecting related component one after another.

      Related component :IPM, ADM, DDM, FAM, RAM, IMS, Cluster module.

    5. Is the DTC erased?

      YES 

      Substitute with a known-good pertinent component and check for proper operation. If the problem is corrected, replace pertinent component and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

      NO 

      Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

      Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals