LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2007 >> Sedona EX >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P0646 A/C Clutch Relay Control Circuit Low >> Monitor SCANTOOL Data
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Monitor SCANTOOL Data

  1. Ignition "OFF"
  2. Connect Scantool and Engine "ON"
  3. Monitor items related to "A/C" on Current Data
    Fig 1: Scan Tool Display Screen - A/C Switch
    G04883532Courtesy of KIA MOTORS AMERICA, INC.
  4. Are those related current data displayed correctly?

    YES 

    • Fault is intermittent caused by poor contact in Sensor' s and/or PCM' s connector or was repaired and PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO