Procedure Of Variant Coding

Connect the scan tool to the data link connector located underneath the dash panel. Turn ign key to the ON position
Select vehicle name.
Select ANTI-LOCK BRAKE SYSTEM.
Select the variant coding.

Fig 1: Scan Tool Display - VARIANT CODING
Courtesy of KIA MOTORS AMERICA, INC.
Follow the next procedure according to the comment

Fig 2: Scan Tool Display - VARIANT CODING
Courtesy of KIA MOTORS AMERICA, INC.
Confirm the condition, and then push the "REST".

Fig 3: Scan Tool Display - VARIANT CODING
Courtesy of KIA MOTORS AMERICA, INC.
If the procedure is finished, the screen is displayed as shown below.

Fig 4: Scan Tool Display - VARIANT CODING
Courtesy of KIA MOTORS AMERICA, INC.
IGN off.
IGN on.
The variant coding is completed.
CAUTION:
- If the warning lamp (ESC, EBD, ABS) is illuminated, follow the "Variant coding" again.
- For the vehicle equipped 4WD, delete the DTC(s) memorized in 4WD ECU when variant coding Is completed.