LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2008 >> Sedona EX >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Replacement >> Heater Control Unit Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Heater Control Unit Replacement

  1. Remove the center fascia panel. See REPLACEMENT .
  2. Remove the console upper cover (A).
  3. Disconnect the connector (B).
    Fig 1: Identifying Center Cover And Connector
    G04884069Courtesy of KIA MOTORS AMERICA, INC.
  4. Loosen the air vent mounting screw, then remove the air vent (A).
    Fig 2: Identifying Air Vent And Fastener Locations
    G04884080Courtesy of KIA MOTORS AMERICA, INC.
  5. After loosening the heater control unit mounting screws, then remove the heater control unit (A).
    Fig 3: Identifying Heater Control Unit And Screw
    G04884081Courtesy of KIA MOTORS AMERICA, INC.
  6. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector (A) is plugged in properly.
    Fig 4: Identifying Connector (1 Of 2)
    G04884082Courtesy of KIA MOTORS AMERICA, INC.
    Fig 5: Identifying Connector (2 Of 2)
    G04884083Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals