Repair Procedures: Removal
CAUTION:
- Removal of the airbag must be performed according to the precautions/procedures described previously.
- Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
- Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
- Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
- Remove the front bumper. (Refer to BUMPER )
- Disconnect the Front Impact Sensor connector.
- Remove the Front Impact Sensor mounting bolt and sensor bracket cover.
- Remove the Front Impact Sensor.