LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Rio5 SX, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTC Troubleshooting Procedures (2 Of 2) >> DTC P0630 VIN Not Programmed Or Incompatible-ECM/Pcm >> Monitor Scan Tool Data
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Monitor Scan Tool Data

  1. Ignition "OFF"
  2. Connect Scan Tool and Ignition "ON"
  3. Monitor the ECM/PCM status using the VIN READING function.
  4. Is the ECM/PCM status Virgin?

    YES 

    NO 

    • Fault is intermittent caused by poor contact in Sensor's and/or ECM/PCM's connector or was repaired and ECM/PCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
    NOTE: There is a memory reset function on scan tool that can erase optional parts automatically detected and memorized by ECM/PCM.
    Before or after testing ECM/PCM on the vehicle, use this function to reuse the ECM/PCM
scientia non olet · About LEMON Manuals