LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Rondo EX, 2.4 8 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.4L >> Variable Charge Motion Actuator (VCMA) >> Repair Procedures >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

  1. Turn ignition switch OFF.
  2. Disconnect the electric variable swirl control actuator connector.
  3. Check that swirl valve is stuck by foreign material.
  4. Measure resistance between motor (+) and (-) control terminals of the motor.
  5. Check that the resistance is within the specification.

    Specification:  Refer to SPECIFICATION  section.

  6. Measure resistance between voltage supply terminal and ground terminal of the position sensor.
  7. Check that the resistance is within the specification.

    Specification:  Refer to SPECIFICATION  section.

scientia non olet · About LEMON Manuals