September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Repair Procedures: Removal
- Remove the ignition key from the vehicle.
- Disconnect the battery negative cable and wait for at least three minutes before beginning work.
- Disconnect the DAB, PAB, KAB, CAB and BPT connectors.
- Remove the console lid cover. (Refer to
INTERIOR
)
- Disconnect the SRSCM harness connector after pulling the connector locking lever.
Courtesy of KIA MOTORS AMERICA, INC.
- Remove the SRSCM mounting bolt (1EA) and nuts (2EA) from the SRSCM, then remove the SRSCM.