LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> Brakes >> Traction Control >> Esp (Electronic Stability Program) >> DTC Troubleshooting >> DTC C1213: Wheel Speed Frequency Error >> Monitor Scan Tool Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Monitor Scan Tool Data

  1. Engine "ON".
  2. Connect scan tool to Data Link Connector (DLC).
  3. Start and drive vehicle in gear and maintain vehicle speed at or above 10 km/h (6.2 mph)
  4. Monitor the "Wheel Speed Sensor" parameter on the Scan Tool.

    Specification: Compare with another parameters related to wheel speed sensor. If it is the same as another parameters, it is in normal condition.

    Fig 1: Scan Tool Display - Wheel Speed Sensor (Normal Data)
    G06412674Courtesy of KIA MOTORS AMERICA, INC.
    Fig 2: Scan Tool Display - Wheel Speed Sensor (Abnormal Data)
    G06412675Courtesy of KIA MOTORS AMERICA, INC.
  5. Is parameter displayed within specifications?

    YES 

    • Fault is intermittent caused by poor connection in wheel speed sensor harness, Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

scientia non olet · About LEMON Manuals