Repair Procedures: Removal

CAUTION:

Removal of the airbag must be performed according to the precautions/procedures described previously.
Before disconnecting the side impact sensor connector(s) , disconnect the side airbag connector(s) .
Do not turn the ignition switch ON and do not connect the battery cable while replacing the side impact sensor.

Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
Remove the lower anchor bolt.

Fig 1: Locating Lower Anchor Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Remove the following parts. (Refer to INTERIOR )
1. Door scuff trim, Center pillar trim
Disconnect the Side Impact Sensor connector and remove the Side Impact Sensor mounting bolt.

Fig 2: Identifying Side Impact Sensor Connector
Courtesy of KIA MOTORS AMERICA, INC.