DTC P0708: Transaxle Range Switch - High Input: DTC Detecting Condition

DTC DETECTING CONDITION

Item	Detecting Condition	Possible cause
DTC Strategy	Check for multiple signals	Faulty Shift cable adjustment Faulty Inhibitor switch and Manual control lever position adjustment Faulty PCM
Enable Conditions	Battery Voltage ≥ 10V
Threshold Value	Multiple signal
Diagnostic Time	More than 25sec
Fail Safe	Recognition as previous signal When P-D or R-D or D-R SHIFT is detected, it is regarded as N-D or N-R though "N" signal is not detected. When sports mode S/W is ON without P,R,N, D-RANGE signals, it is regarded sports mode.(DTC is not set)